Auto-Changeover (Heat/Cool) - Honeywell FocusPRO TH6000 Serie Manuel D'utilisation

Operating Manual
Auto changeover (heat/cool) About your new thermostat
Fan
Set Clock/Day/
Auto
Schedule
Press until screen
displays "Auto"
Note: The Auto system setting
may not appear, depending on
how your thermostat was installed.
69-1921EFS—01
Auto Changeover is a feature used in cli-
System
mates where both air conditioning and heat-
Auto
ing are used on the same day. When the sys-
tem is set to Auto, the thermostat automati-
cally selects heating or cooling depending on
MCR29465
the indoor temperature.
Heat and cool settings must be at least 3
degrees apart. The thermostat will automati-
cally adjust settings to maintain this
3-degree separation (called "deadband").
The 3-degree separation between heating
and cooling set temperatures is fixed, and
cannot be changed.
14