Romus MR 630 Manuel D'instructions page 8

Multi-flooring Cutter MR-630
Réf. 93425
WARNING: FAILURE TO FOLLOW THESE RULES MAy RESULT IN
SERIOUS INjURy ! USING THIS MACHINE WITH RESPECT AND CAUTION
WILL CONSIDERABLy LESSEN THE POSSIBILITy OF PERSONAL INjURy.
SAfeTY RuleS fOR THe flOORIng CuTTeR
1. READ AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE OPERATING
THE Multi-flooring Cutter MR-630.
2. If you are not thoroughly familiar with the operation of Multi-flooring Cutter
MR-630, obtain advice from a qualified instructor.
3. Stay alert. Do not operate while under the influence of drugs, alcohol, or
medication.
4. Always wear safety approved eye protection with side shields.
5. Keep work area free of debris.
6. Keep children and unauthorized persons away from the Multi-flooring Cutter
MR-630 and work area.
7. Make sure tool is secure. Operate only on a firm substrate or solid stand.
8. Use the right tool. Do not force the Multi-flooring Cutter MR-630 or use it for a
job for which it was not designed; use only on approved materials.
9. Keep the blade sharp. A dull blade will not perform properly.
10. Always keep hands away from blade while operating or carrying the cutter.
11. Do not alter or misuse this tool. The Multi-flooring Cutter MR-630 is precision
built; modifications not specified in this manual may result in a dangerous and
unsafe environment.
12. Maintain the Multi-flooring Cutter MR-630 with care. Keep Blade sharp and clean.
Follow instructions for changing accessories.
13. Use only recommended accessories. The use of improper accessories may be
hazardous and cause injuries.
14. Never leave the Multi-flooring Cutter MR-630 unattended. Secure the handle with
the lock chain when not in use.
GB
8