Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
VACUUM MOTOR INTAKE FILTERS
1. Turn off and unplug vacuum cleaner.
2. Position handle in operating position.
3. Open vacuum lid.
4. Remove clamp with screwdriver to gain access to
filter.
5. Remove plastic cap covering the motor.
6. Remove plastic retainer in cap.
PAGE 7 OF 24
MAINTENANCE CONTINUED
SPECIFICATIONS
Model
Voltage / Frequency
Vacuum Motor Rating
Brush Motor Rating
Total Power Consumption
Bag capacity – Dry
Airflow
Vacuum – Water Lift at Sealed Orifice
Filtration – HEPA
Vibration at Controls
Brush Width
Cable Length
Weight (Including Cord)
Noise level
Construction Class
Protection
Machine Dimensions
Operating Position
7.
Replace filters in their original positions.
(See Figure 11)
Figure 11
Filters
8. Reinstall plastic retainer in cap.
9. Reinstall cap onto motors.
10. Reinstall clamp.
NOTE: Replace the vacuum motor filters every
six months.
93030
120 V / 60 Hz
1512 W
1/4 hp
14 A
45.5 qt.
224 cfm
71 in.
99.97% @ 0.3 micron
< 2.5 m/s
2
30 in.
75 ft.
74 lbs.
69.9 dB(A)
I
IP20
Folded: 36 x 31 x 19"
36 x 31 x 42"
0621 IH-7645
Publicité
Table des Matières
