Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - AMATECH BF854 Instructions D'utilisation

INSTRUCTIONS FOR USE
l. Once lithotomy level has been achieved, check for pressure points and, if
necessary, make appropriate adjustments.
NOTE: Patient leg position symmetry can be documented using leg length indicator
markings on the stirrup posts.

3.3 Device controls and indicators:

The indicators below are placed on the sole of each boot.

3.4 Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2

Removal Instruction:

a. Lower stirrups by grasping and twisting the Release Handles and simultaneously
down staging the legs slowly to the desired level. A.O.R.N. recommends the
lowering and staging process take two full minutes. Gently remove patient's legs
from stirrups.
b. Stirrups should be in a vertical position for removal from Rail Clamp slot. Loosen
clamp and remove stirrups.

3.5 Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support user of
the device shall first contact his or her supplier.
Document Number: 80024522
Version: A
This symbol represent the patient's right foot.
This symbol Represent the Patient's left foot
Page 14
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E