Used Oil Disposal - OP TUBOMATIC H48 EL Manuel D'utilisation Et De Maintenance

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 0303580838
________________________________________________________________________________________________________________
16. Use gloves and adequate personal protection (gloves, appropriate clothing, etc.).
17. Use of the swaging machine is permitted only to skilled adult staff (a training course is
recommended for those who have never used the equipment).
18. During work, always follow all instructions given by the labels on the machine
19. Our equipment is designed with the technical safety features required; customers are
advised to comply strictly with the instructions given in this manual.
20. Moving parts must be kept well greased once every 6 months.
E
21. Original spare parts must be used in order to maintain the original characteristics and
N
the validity of the certification.
G
22. Always turn off the machine while maintaining it or exchanging tools.
L
23. Once you have finished operations always re-mount the eventually removed protections
I
before turning on the machine.
S
H
24. Always keep your hands off the pressing area while the motor is on. When inserting the
hose for fitting, make sure that there is at least a minimum distance of 120mm between
the operator's hand and the pressing area.
25. Use limit:
• The machine cannot be used in bursting setting.
• The machine cannot be used in natural setting.
• Do not leave the machinery exposed to atmospherical agents which do not fit into
protection degree (IP55) of the installed components.
26. The machine presents residual risks entailed from a non correct use: strictly follow the
28. Do not insert plastic, glass or other kind of objects in the operating area or in moving
parts.
29. Do not accomplish repairs personally, address the building firm.

USED OIL DISPOSAL

Do not disperse the used oil in the environment. Operate according to the national and/or
EC legislative provisions in force.
directions defined in the use and maintenance manual.
27. Do not insert animals in the operating area or in moving parts.
30