Safety Regulations - OP TUBOMATIC H48 EL Manuel D'utilisation Et De Maintenance

OP
S.r.l.
25131 BRESCIA - Via Serpente, 97 - Tel. 030/3580401 - Fax 0303580838
________________________________________________________________________________________________________________

SAFETY REGULATIONS

1. Always make sure that the machine is placed on a stable, safe surface and that it is not
causing vibrations that, in addition to being bothersome and useless, may cause
malfunctions.
2. Leave enough room in the work zone.
3. The manufacturer accepts no responsibility for any damage caused by negligence.
4. NEVER
UNDERSTANDING ITS CONTENTS
5. CAUTION ! If improperly used, the equipment may be dangerous and may
cause injury to parts of the body, which must never come within the range of
moving parts.
6. Swaging operations are safe provided the regulations given below are
complied with.
7. CAUTION ! It is absolutely essential that all working operations are carried out
operator only
8. Never attempt to use the machine above the permitted working pressures; this might
cause serious danger to the operator
9. This manual must be given to the operator and kept. The proprietor of the equipment is
responsible for it. Ensure that the operator is aware of his responsibilities.
10. Guards must never be removed or tampered with.
11. Before connecting to the power supply, make sure that there is adequate protection
upstream of the connection against overloads and short circuits (it is advisable to have
protection against excessive undervoltage as well).
12. Check that the supply voltage and frequency correspond to the rating on the machine's
rating plate.
13. Use only cables, plugs and extension cables that comply with CEI standards; keep the
supply cable far from the work zone.
Always remove the plug from the socket
14.
Operations of maintenance, as well as repairs, should be performed by specialised
personnel.
15. Make sure that hoses are always crimped in conditions of safety.
USE the equipment
.
29
before reading
, before performing any work on the machine.
the user manual
by one
and
E
N
G
L
I
S
H