Appendix; A: Technical Data; Environmental Data, Safety Features And Requirements - Fasep B140.G2.T Manuel De L'utilisateur

Fasep 2000 srl
Balatron B140.G2.TC: User's Manual

APPENDIX

A: Technical Data
Power source
Balancing speed
Measuring time
Measure precision
Wheel dimensions
Wheel balancer dimensions
F . 29: Wheel balancer dimensions
IG
B:

Environmental Data, Safety Features and Requirements

Environmental Data
[Operating conditions]
This unit is designed for indoor use only.
Temperature:
Relative Humidity:
[Storage conditions]
Package is designed for indoor storage only.
Temperature:
Relative humidity:
Safety Features
1. The weights compartments may be removed for servicing. It is secured to the machine body through screws so that only
voluntarily it may be removed. Removal of the weights compartments is therefore restricted to Authorized Service Engineers.
2. The Control Panel may be removed for servicing. It is secured to the machine body through screws so that only voluntarily
it may be removed. Removal of this protection is therefore restricted to Authorized Service Engineers.
!
CAUTION:
I
WARNING
G
NOTE:
20grs (B140.G2.T)
Rim Diameter
Wheel Diameter
Wheel Weight
0 to 45°C
5 to 80% a 40°
-25° to 70°C
5 at 95% to 40°C
The safety cover is anyway required when using the motorcycle adapter.
FASEP 2000 srl shall not be responsible for any inconvenience, breakdown, accidents caused directly
or indirectly by unauthorized service. Service to any parts by unauthorized engineers will void warranty
and will any right of the owner of the unit.
As this unit runs at speed below 100rpm, a safety cover is not required. However a safety cover is
recommended when balancing wheels with diameter bigger then 20".
3Ph, 50-60Hz, 220-380V
82-98 rpm
10-25 s.
da 8" (200mm) a 26" (650mm)
max 34" (870mm)
Max 200 Kg (440Lbs)
L (mm)
L1 (mm)
P (mm)
P1 (mm)
H (mm)
Peso (kg)
B-1
Rev. 1.3
01 June 2013
B140.G2.T
1110
500
1000
200
1000
130