How To Control The Calibration Of Wheel Balancer - Fasep B140.G2.T Manuel De L'utilisateur

Fasep 2000 srl
Balatron B140.G2.TC: User's Manual
4.2

How to control the calibration of Wheel Balancer

Press <+/-> to select CAL TEST.
Place a wheel on the flange (see the picture 11).
Hand spin the wheel
Put the calibration weight as shown in the picture
12.
Hand spin the wheel
Press <FINE> to see actual values. 160-0 (±3)
is correct result
When all LED (left side) are lit, calibration weight
must be at exactly 6 o'clock.
If no, press <FUNC> to calibrate position
Turn the wheel until the calibration weight is
located at 6 o'clock.
Press <SET> to calibrate the position.
Press <MODE/ESC> to return to normal balancing
mode
4-2
F . 11
IG
F . 12
IG
Rev. 1.3
01 June 2013