How To Optimize Umbalance Of The Wheel - Fasep B140.G2.T Manuel De L'utilisateur

Fasep 2000 srl
Balatron B140.G2.TC: User's Manual
6

HOW TO OPTIMIZE UMBALANCE OF THE WHEEL

6.1 Measure the umbalance of the rim only. Once the measurement of rim umbalance is calculated, press <FUNC> to enter
optimization function.
6.2 After pressing <SET>, the program return to the measurement of umbalance mode, where an indication of the residual
umbalance values will be given.
Mount the tyre on the rim. After mounting the tyre,
the wheel must be put on the shaft in the same
position as before.
Hand spin the wheel
Left display (24 in example) indicates present
static umbalance. Right display (55% in example)
indicates possible reduction of weight in %.
Turn the wheel until SIGN 1 is displayed.
Mark the rim (12 o'clock).
Turn the wheel until SIGN 2 is displayed.
Mark the tyre (12 o'clock).
Put the two marks together to optimize umbalance.
F . 26: first spin, rim only
IG
F . 27: Second spin, complete wheel
IG
7-1
Rev. 1.3
01 June 2013