7 Care and maintenance
Cleaning the Wine storage appliance
EN
•
Disconnect the Wine storage appliance from the power supply and remove the bottles.
•
Wash the inner surfaces with a solution of warm water and baking powder. The solution
can be easily prepared with about 2 tablespoons of baking powder in a quarter of a litre
of water.
•
Wash the outside of the Wine storage appliance with a mild detergent and warm water.
•
Pull out the water container at the bottom and clean it.
Moving the Wine storage appliance
•
Remove all bottles.
•
Secure all loose objects inside the device with adhesive tape.
•
Screw in the levelling feet completely to avoid damage.
•
Close the door with adhesive tape.
•
Ensure that the Wine storage appliance remains securely in an upright position during
transport.
8 Troubleshooting
Many of the most common problems with the Wine storage appliance are easily solved, saving
the cost of a possible call to the service center. Before calling the service center, follow the
troubleshooting tips below.
PROBLEM
Wine storage appliance doesn't
work
Wine storage appliance not cold
enough
Light doesn't work
Vibrations
Wine storage appliance is too loud
Door does not close properly
No LED display
POSSIBLE CAUSE
Not connected. Incorrect voltage. Circuit breaker tripped or fuse
blown.
Check temperature settings.
External environment may require higher setting.
Door not completly closed or opened frequently most recently.
Door seal not sealing properly.
Device to close to the wall.
Contact your supplier or service center.
Device not level on the ground.
Device not level on the ground, objects or dust in the fan.
Wine storage appliance not level on the ground.
Door reversed and not properly installed.
Seal too weak.
Hinges adjusted.
Main control does not work.
PCB problem.
Possible problem with the connector.
36