Beko CEG5301X Mode D'emploi page 25

5 Cleaning
4. When the empty system function is completed, the appliance will
switch off automatically.
WARNING: After perform EMPTY SYSYEM FUNCTION; press
the hot water button until water can come out from spout
when the coffee maker is reused again.
5.4 Manual Rinsing
You can perform a manual rinsing cycle to clean the coffee nozzle after
use. It is also suggested to perform a manual rinsing if the appliance has
not been used for a long period of time.
1. In standby condition, press and hold the
together.
2. The hot water button
espresso button
dispense a small amount of water which is used for the rinising.
WARNING: Water comes out of the coffee nozzle is hot and
is collected in the drip tray underneath. Avoid contact with
splashes of water.
3. After rinsing, the appliance will return to the standby condition.
Fully Automatic Coffee Maker / User Manual
, strong espresso button
will then goes off. The coffee nozzle will then
and hot water button
and mild
25 / EN