Publicité
Les langues disponibles
Les langues disponibles
3. Hold the ball-shaped end of the butterfly.
4. Insert the butterfly on the upper part of the blade. (See the above figure)
If you want to remove the butterfly from the blade, just hold the ball-shaped end and pull it out with rotations
in both directions.
3. The speed is limited 1 to 5 speeds when use butterfly. Otherwise the butterfly easy breaks.
Use the butterfly
Please follow the steps:
9.
Install the blade and butterfly, put the food in to the bowl
10. Assemble the bowl to the main unit .
11. Install the bowl on the main appliance.
12. Plug in and start the appliance.
13. Set the time you need, select the speed (1-5).
14. Sound "Beep" will be heard 30 seconds when the working time is automatic stop.
15. After use, turn the main appliance off. Remove the chopping bowl lid.
16. Take out the processed food from the bowl.
Caution:
3. Only starts appliance after the butterfly has been positioned into place!
4. Don't add too hard ingredients that might damage or block the butterfly when the blade is in motion and the
butterfly is fitted!
How to use stirring attachment (blade cover)
Install/remove the blade cover
1. Hold the ball-shaped end of the blade cover.
2. Insert the blade cover on the upper part of the blade. (See the above figure)
If you want to remove the cover blade from the blade, just hold the ball-shaped end and pull it out with rotations in
clockwise directions.
3. The speed is limited 1 to 5 speeds when use butterfly. Otherwise the
Caution:
1. The speed is limited 1 to 5 speeds when use blade cover. Otherwise the
cover is easy break.
2.The temperature limited less than 100
℃.
blade cover is easy break.
Publicité
