Fagor FG508 Manuel D'utilisation page 32

3.Please don't use the blade cover if stirring the liquid foods.
Fault code:
Code Explanation
When machine heating the temperature detector open
circuit ，or meaning the NTC open circuit.
E01
E02 Machine failures
2. The bowl does not install on the unit.
2. bowl lid does not install
E03
3. or bowl lid was installed incorrectly
1. The ingredients is too more or the speed is too low
lead to motor cannot running.
E04 2.The machine motor have high temperature protect,
after the machine working long time cause motor's
temperature too high lead to motor cannot running.
E05 Dry burning
Solution
Maintenance department to repair
Return to seller and repair
Turn off the machine, install the
bowl, or cover the lid, or take out
the bowl lid and reinstall it
correctly according to the IM,
reset the machine.
1. Reduce some ingredients or set
higher speed.
2. Stop working few minutes.
Turn off the machine and let the
appliance cool down then restart
it.