Table des Matières
Publicité
looking for the cause of the disturbance and then for quieter places to move their
nests to.
• When insects leave their nests they will leave behind eggs and larvae. It is therefore
necessary to keep the device in use for at least 4 to 6 weeks, even if you can't see any
insects. As a preventive measure, the repellent can be used throughout the whole
year.
• The dispersion of the sound depends on the local surroundings.
3. Safety Instructions
• Electrical appliances, packaging materials, etc. do not belong in the hands of children.
• The device may only be used with the stated voltage: 9 V DC power supply.
• If repairs are needed, only original spare parts may be used to avoid serious damage.
• This device is not designed to be used by persons with reduced physical, sensory or
mental capabilities, lack of experience or knowledge or children under the age of 8
years unless they are supervised or have been instructed in the use of the device by a
person responsible for their safety.
• Keep these instructions in a safe place and pass them on when giving the device to a
third person.
• This unit is suitable for indoor use only.
• Make sure that the device is placed onto a dry floor. The device must be protected
from dampness, extreme cold and heat.
• In schools, training centres, clubs and workshops, the operation the device must be
monitored by trained personnel.
• The accident prevention regulations of the professional associations for electrical
systems and equipment should be strictly followed when using this device in com-
mercial buildings.
• Make sure that the power cord will never be squashed, subjected to sharp edges or
damaged in any other way. Ensure that the cable does not become a tripping hazard.
• Do not use this device in the vicinity of explosive gases, vapours or excessive dust.
• Do not connect the device if the power cord or the device is damaged. Disconnect the
device immediately from the mains.
• The power supply may only be connected to a properly installed power socket. The vol-
tage must match the specifications depicted on the nameplate of the power supply.
• Do not remove any stickers from this device. The sticker may contain important sa-
fety information.
• Should there be any questions on the installation, connection, functions, mainte-
10
Publicité
Table des Matières
