Chapter 6: Using the TV's Features
Setting the PC Mode
Automatic Screen Adjustment
This function automatically adjusts the screen position, clock, phase and scale in pc mode.
The displayed image will disappear for a few seconds while the auto configuration is in progress. If the result
of the automatic adjustment is not correct, you can manually adjust the settings to fit your viewing prefer-
ence.
1. Press the MENU button to enter the on-screen
menu and then press either the Down or Up button
to select the Video sub-menu.
2. Press the OK button to enter the sub-menu and
then press either the Down or Up button to select
VGA.
3. Press the OK button and then use the Down or Up
button to select Auto Adjust.
4. Press the OK button to start the auto adjustment.
5. If the result of the automatic adjustment is not
correct, you can manually adjust the settings to fit
your viewing preference. (See the next page for
manual adjustment settings.)
Note
- Select the VGA mode by pressing either the INPUT button.
80
Video
Auto Adjust
F F G G
H.Position
60
V.Position
50
Phase
0
Clock
100
Select
MENU
Back
Chapter 6