Chapter 3: Using USB Clone Tool
Learning - 22inch
Copying settings out of TV.
Rear panel of the set
SERVICE
SPEAKER
NORMAL
SWITCH PILLOW
ZEN
PLS OFF RCA
SPEAKER
SPEAKER
AV1
L
R
VIDEO
AUDIO
2.5mm Stereo Cable
(cross data cable)
Teaching
Learning
Learning - 26/32 inches
Copying settings out of TV.
Rear panel of the set
DIGITAL AUDIO
SPEAKER
SERVICE
OUT(COAXIAL)
SWITCH
ZEN
NORMAL
PILLOW
SPEAKER
SPEAKER
2.5mm Stereo
Cable (cross
data cable)
Teaching
Learning
36
1. Turn TV on.
PILLOW JACK IN
AUDIO IN
ANTENNA/
2. Connect USB Cloner to TV USB Port.
(RGB/DVI)
CABLE IN
3. Set switch to "learning" position.
Side panel
USB IN
of the set
4. Connect 2.5mm Stereo Cable (cross data cable)
5. Press the Learn button for 1 second. As soon as
USB Cloner
6. The LED will turn Red and flash while the settings
Note : New TV Settings file, "ChList.bin" will appear
1. Turn TV on.
2. Connect USB Cloner to TV USB Port.
PILLOW JACK IN
PLS OFF RCA
3. Set switch to "learning" position.
Side panel
USB IN
of the set
4. Connect 2.5mm Stereo Cable (cross data cable)
5. Press the Learn button for 1 second. As soon as
USB Cloner
6. The LED will turn Red and flash while the settings
Note : New TV Settings file, "ChList.bin" will appear
(Status LED will Light red without flashing.)
between the TV service port and the USB Cloner
service port.
the LED turns green, release the button.
are being saved to the USB Key. Upon successful
copy, the LED will light up yellow for 2 seconds
and then return to a red, constantly lit state.
Upon an unsuccessful copy, the LED will flash an
error code as described in the "Error Table" sec-
tion.
on the USB Cloner .
(Status LED will Light red without flashing.)
between the TV service port and the USB Cloner
service port.
the LED turns green, release the button.
are being saved to the USB Key. Upon successful
copy, the LED will light up yellow for 2 seconds
and then return to a red, constantly lit state.
Upon an unsuccessful copy, the LED will flash an
error code as described in the "Error Table" sec-
tion.
on the USB Cloner .
Chapter 3