Master(Installer) Remote; Put Batteries In The Remote - RCA J22H760 Mode D'emploi

Chapter 2: Using the Remote Control

Master(Installer) Remote

The master remote control (R130K2) accesses all of the TV's menus. It is used to customize the TV's functional-
ity for specific users or specific situations.
ON-OFF
1 2 3
1
SYSTEM
4 5 6
RESET
7 8 9
SKIP SLEEP GUIDE
5
0
GO BACK CC
8
CH
MUTE
10
VOL VOL
CH
11
INPUT ANTENNA
MENU OK INFO
13
CLEAR
14
MA ST ER
R130K2

Put Batteries in the Remote

• Remove the battery compartment cover
from the back of the remote by pushing
the tab and lifting off the cover.
• Insert two fresh batteries. Make sure the
polarities (+ and -) are aligned correctly.
• Replace the cover.
34
1. NUMBER BUTTONS
Selects channel numbers.
2. ON-OFF
2
Switches the set on or off.
3. SYSTEM
3
Configures the remote for TV1/TV2.
Configures the remote preamble (Bed 1/Bed 2) for use
4
with multi TVs in 1 room.
7
Press and hold <SYSTEM> and <1> key to set remote for
6
"Bed1".
9 Press and hold <SYSTEM> and <2> key to set the remote
for "Bed2". Refer to "Key Management","RCU type" in
Chapter 5.
4. RESET
Unused.
12 5. SKIP
Unused
15
6. SLEEP
16
Sets the sleep timer.
7. GUIDE
17
Display "Channel List" menu.
8. GO BACK
Return to the previous menu.
9. CC
Select the Caption menu directly.
10. VOL + / VOL -
Adjusts sound level.
CH + / CH -
Select a channel.
MUTE
Switches the sound on or off.
11. INPUT
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB
mode.
12. ANTENNA
Unused
13. MENU
Displays "Installer" on screen menu.
There are 2 remotes for this TV;
R130K1 - user Remote. This remote displays a basic user
menu when the menu key is pressed.
R130K2 - installer Remote. This remote displays an
installer menu when the menu key is pressed.
14. Navigational Controls
Adjusts menu settings.
Selects menu item.
15. OK
Accepts your selection.
16. INFO
Display the current channel information.
17. CLEAR
Exit from any OSD.
Chapter 2