Introduction - Ecotap Duo Manuel

13. INTRODUCTION

Thank you very much for selecting the Ecotap® wall-mounted charging station. This manual
describes the Wall Charging Station equipped with two type 2 sockets of 22kW each.
This manual contains important information for the proper and safe installation and use of
this charging station.
The charging station is designed to supply power to vehicles equipped with a modus 3
charging system in accordance with DIN EN 50556, IEC 61851-1 (edition2.0), VDE- AR-N
4102 appendix: 2012-04. Together with the vehicle and system, the charging station will
select the best option for charging the vehicle quickly and safely.
The entire charging station complies with the 2014/35/EU directive concerning
harmonization of legislation concerning electric material within certain voltage limits
(rearrangement of all previously published versions).
This manual provides insight into how the charging station can be safely installed and
used. This manual has been compiled to ensure maximum functionality and lifespan of the
charging station.
This manual has been drawn up with great care. However, if anything remains unclear,
please contact your supplier before installing the charging station.
Proper functioning of the charging station can only be guaranteed if the installation is
performed by an authorized or certified installer/technician. If the charging station is not
installed by a certified installer, this may have consequences for the device' s warranty.
Please read this manual carefully before installing and using the charging station.
Store this manual with the charging station to ensure the instructions and safety
regulations are always available.
© Copyright
No part of this publication may be copied, reproduced or saved in a retrieval system without
Ecotap® B.V. ' s prior written consent.
This is an English translation of the original manual, which was written in Dutch.
15. www.ecotap.nl
14/04/22