Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6. Explanations Of Warning Signs Used For This Tool.
The operator's
Hearing protection
Instruction must be
Must be worn
read before work
starts
7. Application.
Compressor tool, where the force is directed onto an inserted rivet set.
8. The weight of this tool is about: 1.2 ~4.3 Kgs.
Note: If the weight of this tool exceeds 15Kgs, the following attention shall be paid to:
(1) Be sure that you can afford the weight.
(2) Be sure to wear foot protection, to prevent the risk of impact due to the drop of tool.
3. Maintenance Instruction
1. Lubrication.
Proper lubrication is the owner's responsibility Failure to lubricate the air tool properly will dramati-
cally shorten the lire of the tool and will void the warranty.
This riveter requires lubrication before the initial use and before and after each additional
use.
2. The riveter requires lubrication throughout the life of the tool and it must be lubricated in two se-
parate areas: the air motor and the riveting mechanism. Follow the outlined procedures.
3. Air Motor Lubrication.
The motor must be lubricated daily.
Disconnect the impact wrench from the air supply before lubricating.
Eye protection
Engine oil
must be used or
safety glasses worn
ENGLISH
16
Fuel
Publicité
Table des Matières
