Maintenance Instruction - COFAN ficha tecnica 586 Guide D'utilisation

6. Explanations Of Warning Signs Used For This Tool.
The operator's instruc-
tion must be read before
work starts
7. Application.
Rotary power tool, with a reversible spindle driving a hammer which periodically strikes an anvil.
Which includes a drive adapter for the purpose of tightening or loosening nuts and blots without
producing any major torque reaction on the power tool.
8. The weight of this tool is about : 1.0~19.3 Kgs.
Note: If the weight of this tool exceeds 15Kgs,the following attention shall be paid to:
(1) Be sure that you can afford the weight.
(2) Be sure to wear foot protection, to prevent the risk of impact due to the drop of tool.

3. Maintenance Instruction

1. Lubrication.
Proper lubrication is the owner's responsibility. Failure to lubricate the air too properly will dramati-
cally shorten the life of the tool and will void the warranty.
This impact wrench requires lubrication before the initial use and before and after each
additional use.
2. Impact wrench requires lubrication throughout the life of the tool and must be lubricated in two
separate areas : the air motor and the impact mechanism. Follow the outlined procedures and refer
to Figure I for details.
3. Air Motor Lubrication The motor must be lubricated daily. An air motor cannot be oiled too often.
Disconnect the impact wrench from the air supply before lubricating.
3.1. Disconnect the impact wrench from the air supply.
3.2. Turn the impact wrench upside down.
Warning: Risk of crus-
hing (intended for open-
ended spanners)
ENGLISH
Warning: Risk of crus-
hing (between
the reaction bar and
the working piece)
18
Direction of rotation