COFAN 0900 0501 Guide D'utilisation page 17

15
4. Warnings.
(1) The power tools shall not be used in explosive atmospheres unless specially designed for that
purpose.
(2) Pay attention to the risk of a whipping compressed air hose.
(3) Special precautions shall be taken when working in explosive atmospheres.
(4) Working with a percussive tool can generate dust which, depending on the material being wor-
ked on, could be harmful to the operator.
(5) The inserted tool on heavy types of percussive non-rotary power tools, e.g. breakers, is exposed
to heavy strains and can after a long period of use break due to fatigue.
(6) The unexpected tool movement or breakage of inserted tool may cause injuries to the lower
limbs, in particular the feet.
(7) The unsuitable postures may not allow counteracting of normal or unexpected movement of the
power tool. A working position which remains stable shall be adopted in the event of a breakup of
the inserted tool.
(8) Holding the inserted tool by the free hand can be a source of vibration damage.
(9) The power tools shall be isolated from the energy source before changing the inserted tool.
(10) Pay attention to the risk of a whipping compressed air hose.
(11) Rest after continuous operation.
5. Instructions.
(1) The power tools shall be isolated from the energy source before changing the inserted tool.
(2) The regular inspections for cracks and fissures in the compression mechanism and yoke shall
be made.
(3) Release the start and stop device in the case of an interruption of the energy supply.
(4) Only lubricants recommended by the manufacturer shall be used.
ENGLISH