Dibo 1D CPU-S Mode D'emploi page 65

E N
S A F E T Y – G E N E R A L WA R N I N G S
Risk analysis:
On the machine a risk analysis has been carried out. The risk analysis focuses
on mapping the most important risks that may occur during use and / or
maintenance and the measures that have been taken to exclude or minimize
the risk. The safety rules can be followed to limit these risks. Please note; the
machine is constructed in such a way to avoid dangerous situations as much
as possible, but a totally risk-free machine is not possible. There are always
residual risks present. Therefore, read all (safety) instructions in this chapter
carefully and inform yourself if there are any uncertainties.
Maintenance:
Electromechanical, pneumatic and hydraulic work must always be carried out
by persons with expertise in relation to this specific work. Always inform the
different operators before starting any special and / or maintenance work.
Always follow the maintenance and / or inspection activities as described in
this manual. The periodic checks and the replacement of parts must also be
followed as described. We advise that new people are instructed about the
possible dangers, as well as the prevention of the various dangers.
DiBO 13