Table des Matières
Publicité
8940164682
Part no
1
Issue no
Series no
1
Date
2019-01
Page
8
Safety instructions
Warning
Make sure you are familiar with the operating instructions before
you use this machine.
The machine, together with any attachments and accessories,
must never be used for anything other than the designated purpose.
All locally legislated safety rules with regard to installation,
operation and maintenance shall be respected at all times.
Refer installation and servicing to qualified personnel only.
Before making any adjustments (e.g. changing sockets) discon-
nect the machine from the compressed air line.
Check the direction of the rotation before using the machine.
Operators of nutrunners with a torque reaction bar should take
particular care to avoid injuries due to squeezing. For safety reasons
– never allow anyone to operate the machine unless he is trained
and thoroughly familiar with how the machine works in different
circumstances. Refer to the section headed "Reaction bar".
The machine may only be used together with the associated
torque reaction bar which is adapted to the screw joint application
concerned. See also the instructions under the heading "Reaction
bar".
Never put your hand on or close to the reaction bar while
the machine is being used.
Check that the power socket is properly fastened. Replace the
retaining or locking pin when necessary. Also replace any worn
socket.
Keep hands, long hair or other objects away from the rotating
socket.
When using a suspension yoke, check that it is in good condition
and correctly fastened.
EN
Publicité
Table des Matières
