Table des Matières
Publicité
INSTRUCTION MANUAL
This product is designed for installing and removing threaded
fasteners in wood, metal and plastic. No other use permitted. For
professional use only.
Main characteristics
Torque range
Free speed
Working pressure
Air consumption
Weight:
CP7600xC
CP7600xC-LH
CP7600xC-R
CP7600xC-4P
CP7600xC-R4P
Noise and vibration emission
Noise according to ISO15744
Measured sound pressure level
Determined sound power level
Spread in method and production
Vibration according to ISO 8662-7
Measured vibration value
Spread in method and production
Declaration of noise and vibration emission
These declared values were obtained by laboratory type testing in
accordance with the stated standards and are suitable for compar-
ison with the declared values of other tools tested in accordance
with the same standards. These declared values are not adequate
for use in risk assessments and values measured in individual work
places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the
way the user works, the workpiece and the workstation design, as
well upon the exposure time and the physical condition of the user.
We, CP, cannot be held liable for the consequences of using
the declared values, instead of values reflecting the actual exposure,
in an individual risk assessment in a work place situation over
which we have no control. This tool may cause hand-arm vibration
syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.human-
vibration.com/EU/VIBGUIDE.htm We recommend a programme
of health surveillance to detect early symptoms which may relate
to vibration exposure, so that management procedures can be
modified to help prevent future impairment.
300-900 Nm
100 r/mn (tr/mn)
3-7 bar
19 l/s (40CFM)
8.2 kg
8.2 kg
8.8 kg
8.5 kg
9.1 kg
dB(A)
79
3
m/s
2
<2.5
EN
8940164682
Part no
1
Issue no
Series no
1
Date
2019-01
Page
3
Publicité
Table des Matières
