DSC WTK5504 Manuel D'utilisation page 6

Bypassing Zones with a WTK5504
Home > Zone Status > Bypass Zones
Press Bypass Zones, scroll up/down through the desired zones, and tap on the bypass icon to bypass the zone. To unby-
pass a zone, tap the unbypass icon.
Emergency Key
When the emergency key is pressed, a new page will appear with:
Fire Fire assistance required. Press and hold for 2 seconds to activate.
Auxiliary Other assistance required. Press and hold for 2 seconds to activate.
Panic Police assistance required. Press and hold for 2 seconds to activate.
IMPORTANT NOTE: The emergency keys are on by default. Please ask your installer if the Fire,
Auxiliary and Panic keys are enabled.
NOTE: Auxiliary alarm key is not intended to be used for medical signals.
NOTE: These events are recorded in the event buffer.
Indicators
Ready - lit when the system/partition is ready to be armed.
Armed - lit when the system/partition is armed.
Trouble - lit when there is a trouble on the system; flashes when battery is low.
AC Power - lit when power is present; off when power is absent.
5
Figure 3 - Zone Bypass
Figure 4 - Emergency Screen