Wall Mounting - HIKVISION UD21782B Mode D'emploi

2 Installation
Before you start:
Check the package contents and make sure that the device in the package is in good condition and all the
assembly parts are included.
Notes:
DO NOT touch the lens cover directly by hand. The image blurs otherwise.
Figure 2-2 DO NOT Carry the Device by the Speaker and Panoramic Camera

2.1 Wall Mounting

Notes:

For cement wall, you need to use expansion bolts to fix the bracket. For wooden wall, you can just use the
self-tapping screws to fix the bracket.

Make sure that the wall is strong enough to withstand more than eight times the weight of the device and
the accessories.
 If you use the brackets the dealer recommends, the pendant adapter in the package is not needed during
installation. It might be useful if you use other brackets. The dimension of pendant adapter is G1
Before you start:
The bracket is not included in the package. You need to purchase one in advance.
Steps:
1. Install the bracket.
1). Drill four Ø 12 screw holes in the wall according to the holes on the bracket, and insert four M8 × 80
expansion bolts into the mounting holes.
2). Align the four screw holes in the bracket with four expansion bolts on the wall.
3). Secure the bracket with four hex nuts and washers.
Figure 2-1 DO NOT Drag the Cables
Table 2-1 Description
No. Description
1 Speaker
2 Panoramic Camera
Figure 2-3 Supplied Pendant Adapter
5
1
.
2