Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Playback
Switching input and adjusting the
volume
1
2
Perform the following procedure when the unit is on.
1. Turn the INPUT SELECTOR dial to switch to the input
with the same name as the jack to which you have
connected the player.
For example, select CD/SACD to play the device
connected to the CD/SACD jack.
0 The indicator for the selected input source lights.
2. Start play on the connected player.
3. Adjust the volume with the VOLUME controller.
Using the Direct Function
1
When you turn the DIRECT feature on, the unit bi-passes
the tone control circuits that adjust the bass and treble,
taking the shortest route which favors sound quality.
0 LOUDNESS/BASS/TREBLE (p12) cannot be adjusted
when DIRECT mode is on.
1. Press DIRECT on the main unit to switch on or off. The
DIRECT indicator lights when on.
Basic Operations
11
En
Publicité
Chapitres
Table des Matières
Dépannage
