LaserLiner SmartLine-Laser G360 Mode D'emploi page 13

Calibration
The meter needs to be calibrated and tested on a regular basis to ensureit produces accurate
measurement results. We recommend carrying out calibration once a year.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents, scouring agents and
solvents. Remove the battery(ies) before storing for longer periods. Store the device in a clean
and dry place.
Technical data
Self-levelling range
Accuracy
Levelling
Operating range
Working range with hand receiver
Laser wavelength
Laser class
Power supply
Operating time
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
Subject to technical changes without notice. Rev19W24
EU directives and disposal
This device complies with all necessary standards for the free movement of goods
within the EU.
This product is an electric device and must be collected separately for disposal
according to the European Directive on waste electrical and electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=AIS
± 5°
± 0.4 mm / m
automatic
(depending on room illumination) 20 m
(depends on how the technology affects the difference in brightness)
30 m
515 nm
2 / < 1 mW (EN60825-1:2014)
4 x 1,5V LR6 (AA)
approx. 7 hours
0°C ... 40°C, max. humidity 80% rH, no condensation,
max. working altitude 4000 m above sea level
-10°C ... 70°C, max. humidity 80% rH
105 x 126 x 76 mm
525 g (incl. batteries)
SmartLine-Laser G360
13
EN