JVC KD-R757 Manuel D'instructions page 17

Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
Installing the unit (in-dash mounting)
Orientate the trim plate as
illustrated before fitting.
When installing without the mounting sleeve
Use only the specified screws. Using wrong screws might damage the
unit.
Flat or round head screws
(not supplied) M5 × 8 mm
Pocket
Bracket (not supplied)
INSTALLATION / CONNECTION
Do the required wiring.
( 16)
Hook on the top side
How to remove the unit
Dashboard of
your car
Bend the appropriate tabs to
hold the sleeve firmly in place.
ENGLISH | 15