Changing The Screen Size; Input Source; Picture Size - Samsung PN50A650T1F Guide De L'utilisateur

Changing the Screen Size

Occasionally, you may want to change the size of the image on your screen. Your
TV comes with six screen size options, each designed to work best with specific
types of video input. Your cable box or satellite receiver may have its own set of
screen sizes as well. In general, though, you should view the TV in 16:9 mode as
much as possible.
1 Follow the Activating Picture Options instructions numbers 1 and 2.
 Press the ▲ or ▼ button to select Size, then press the ENTER button.
 Press the ▲ or ▼ button to select the screen format you want.
Press the ENTER button.
Press the EXIT button to exit.
• 16: : Sets the picture to 16:9 wide mode.
• Zoom1 : Magnifies the size of the picture on the screen.
• Zoom : Expands the Zoom1 format picture.
• Wide Fit : Enlarges the aspect ratio of the picture to fit the entire screen.
• 4: : Sets the picture to 4:3 normal mode.
• Just Scan : Use this function to see the full image without any cutoff when
HDMI(720p/1080i/1080p), Component(1080i/1080p) or DTV(1080i) signals are
input.
➢ When Double (
be set.
➢ Temporary image retention may occur when viewing a static image on the
set for more than two hours.
➢ After selecting Zoom1, Zoom or Wide Fit:
P ress the ◄ or ► button to select Position, then press the ENTER button.
Press the ▲ or ▼ button to move the picture up and down.
Reset: P ress the ◄ or ► button to select Reset, then press the ENTER
button. You can initialize the setting.
After selecting "Just Scan" in HDMI (1080i/1080p) or Component
➢
(1080i/1080p) mode:
P ress the ◄ or ► button to select Position, then press the ENTER button.
Press the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press the ENTER
button. You can initialize the setting.
➢ HD (High Definition)
16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
➢ Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Input Source

ATV, Video, S-Video, Component (480i, 480p)
DTV(720p), Component (720p)
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080p)
PC
Alternately, you can press the P.SIZE button on the remote control repeatedly to change
the picture size.
, ) mode has been set in PIP, the Picture Size cannot
Continued...
English - 8
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
Move Enter
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
Move Enter
Size
16:9
Zoom1 Position Reset
Zoom2
Wide Fit
4:3
Just Scan
Adjust Enter
Size
16:9
Zoom1
Zoom2
Wide Fit
4:3
Just Scan
Position Reset
Move Enter

Picture Size

16:9, Zoom1, Zoom2, 4:3
16:9, 4:3, Wide Fit
16:9, 4:3, Wide Fit, Just Scan
16:9, 4:3
►
Return
Return
Return
Return