Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an
external device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital
channels.)
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the ENTER button.
Press the ▲ or ▼ button to select Caption, then press the ENTER button.
Press the ENTER button to select Caption.
Press the ▲ or ▼ button to select On, then press the ENTER button.
4
Press the ▲ or ▼ button to select Caption Mode, then press the ENTER
button. Press the ▲ or ▼ button to select submenu (Default, CC1~CC4 or
Text1~Text4) you want, then press the ENTER button.
Press the EXIT button to exit.
• The default is Default.
• CC1: The Primary Synchronous Caption Service. These are captions in the
primary language that must be in sync with the sound, preferably matched to a
specific frame.
• CC: The Special Non-Synchronous Use Captions.This channel carries data that
is intended to augment information carried in the program.
• CC: Secondary Synchronous Caption Service.
Alternate program-related caption data, typically second language captions.
• CC4: Special Non-Synchronous Use Captions. Similar to CC2.
• Text1: First Text Service. This may be various non-program related data.
• Text: Second Text Service. Additional data, usually not program related.
• Text/Text4: Third and Fourth Text Services. These data channels should be
used only if Text1 and Text2 are not sufficient.
• The Caption feature doesn't work in COMPONENT, PC, HDMI(DVI)
➢
modes.
• The availability of captions depends on the program being broadcast.
You can also press the CC button on the remote control to select Captions
On or Off.
English - 66
Network setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving
: Off
PIP
SW Upgrade
Caption
Caption
: On
Off
Caption Mode
: Default
On
Digital Caption Options
Move
Enter
Caption
Caption
: On
Caption Mode
: Default
Digital Caption Options
Move
Enter
Caption
Caption
: On
Default
Caption Mode
: Default
CC1
CC2
Digital Caption Options
Move
Enter
►
Return
►
Return
Return