Changing The Input Source - Samsung 6+ Serie Mode D'emploi

Connections
CONNECTIONS COMMON INTERFACE
To watch paid channels, the "CI or CI+ CARD" must be inserted.
y If you don't insert the "CI or CI+ CARD", some channels will
display the message "Scrambled Signal".
y The pairing information containing a telephone number, the "CI or
CI+ CARD" ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
y When the configuration of channel information has finished, the
message "Updating Completed" is displayed, indicating the
channel list is updated.
– Depending on the model, a message requesting your Parental
Lock password may appear when the CI or CI+ CARD is
reinserted.
– Depending on the model, even if the Parental Lock is set to
Allow All a message requesting your password may appear for
adult(18 years and above) programmes.
✎
NOTE
x
You must obtain a "CI or CI+ CARD" from a local cable service provider.
x
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI or CI+ CARD" may
cause damage to it.
x
Insert the "CI or CI+ CARD" in the direction marked on the card.
x
The location of the
x
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the "CI or CI+ CARD" that supports the current antenna settings. The screen will be distorted or will not be seen.
x
When you are watching the satellite TV, remove the CI CARD of terrestrial and cable. The screen will be distorted or
will not be seen.

Changing the Input Source

Source List
Use to select TV or other external input
sources such as DVD / Blu-ray players /
cable box / satellite receivers (Set-Top Box)
connected to the TV.
■ TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB
✎
In the Source List, connected
inputs will be highlighted.
✎
Ext. and PC always stay activated.
10
English
Slot
COMMON INTERFACE
SOURCE
slot may be different depending on the model.
Edit Name
■ VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC / DVI
Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name
the device connected to the input jacks to make your
input source selection easier.
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the
you should set to DVI PC mode under Edit Name.
✎
When connecting an HDMI/DVI cable to the
IN 1(DVI)
Devices mode under Edit Name.
✎
If an HDMI cable is connected to the
HDMI IN 1(DVI)
this case, connect to the
HDMI IN 1(DVI)
port, you should set to DVI PC or DVI
port, the audio may not work. In
PC/DVI AUDIO IN
port,
HDMI
port.