Transport, Handling, Unpacking, Location; Intended Use And Restrictions; Manufacturer's Identification Label Description; Installation And Assembly - edenox DROP IN Manuel D'instructions

EN

3.2 TRANSPORT, HANDLING, UNPACKING, LOCATION

The application with its packaging in wood makes a heavy item.
Be careful in transport, handling and location operations.
On receiving the device, make sure that it has not suffered any damage in transport. Otherwise,
make all pertinent claims to your supplier or to our company.
When the device has been accepted, it is preferable to keep it unpacked until it is put into service
to protect it from any possible mechanical knocks, dust, dirt, etc.
The packaging consists of a wooden palette, a plastic surround and wooden/cardboard corner
pieces, all recyclable materials
The warranty will only cover manufacturing defects, excluding any incorrect handling or use of
the material by the clients or users. Labor costs and travelling expenses are always on the
account of the client. Any responsibility for defects attributable to transport will not be
accepted, unless the relevant claim is placed within a maximum period of 24 hours after
receiving the goods.
For correct and safe lifting and handling operations:
• Arrange a suitable area with flat floor for machine unloading and handling operations.
• Use the type of equipment most suitable for characteristics and capacity
• Make sure the load is stable;
• Handle the machine, keeping it at minimum height from the ground.

3.3 INTENDED USE AND RESTRICTIONS.

Check that the voltage and frequency of the electricity supply network coincide with those
described in the characteristics plaque. It is essential that the electricity installation where the
appliance is to be installed has an earth connection, as well as the necessary protection of a
thermal magnetic switch and a circuit breaker. Do not connect other appliances in the same
electric socket.
The manufacturer declines any liability for improper use of the product.

3.4 MANUFACTURER'S IDENTIFICATION LABEL DESCRIPTION

3.5 INSTALLATION AND ASSEMBLY

Avoid having direct sources of heat, cold, humidity, sunlight and ultraviolet rays in the final
location of this appliance. Heaters, radiators, air conditioning, air currents, etc. can have a
negative influence on the correct operation of the same.
Instruction Manual
Data in the identification label:
1. Brand
2. Serial number (code+ year+ serial
number)
3. Code:
4. Model:
5. CE symbol
6. Waste disposal symbol
7. Manufacturing site
8. Gas Type
9. Gas quantity (gr)
10. Climatic class
11. Working range temperature:
12. Voltage:
13. Power consumption
[14]