Operating The Salamander - Hatco Salamander THERM-MAX TMS Serie Manuel D'utilisation Et D'entretien

Indicator Lights
There are three indicators lights on the control panel:
lEFT Indicator light — Illuminates when the timer knob is
active and the left pair of overhead elements are selected for
heating.
RIGHT Indicator light — Illuminates when the timer knob is
active and the right pair of overhead elements are selected for
heating.
ON Indicator light — Illuminates when the heating mode
selector is turned to any COOK or HOlD function.

Operating the Salamander

COOk Function
During the COOK function, the overhead heating elements
operate at full power/intensity to ensure heat is evenly
dispersed over the cooking surface. The intensity of the
temperature can be adjusted by raising or lowering the upper
housing or by using only one pair of heating elements instead
of all four. The intensity of the heat that penetrates the food
decreases as the distance between the food and the heating
elements increases. Use the following procedure to operate the
salamander in the COOK function.
NOTICE
Do not lock ON timer knob. Unit has instant-on heating
elements designed to reach cooking temperatures quickly.
Locking ON timer knob will increase energy consumption
and may shorten life of heating elements.
1. Move the upper housing to the desired cooking height.
2. Place food product onto the cooking grate.
3. Turn the heating mode selector to the desired COOK
function.
• The ON indicator light will illuminate.
4. Turn the timer knob clockwise to the desired cooking time.
• The appropriate lEFT and/or RIGHT indicator light(s)
will illuminate to indicate which elements are selected
and heating.
Lower upper housing to
increase heat intensity,
Place food product
onto cooking grate.
Figure 12. Operating the Salamander
Form No. TMSCEM-0911
raise to decrease.
5. When time expires, an audible "beep" signal will indicate that
the COOK cycle is complete. The heating elements will turn
off and the lEFT and/or RIGHT indicator light(s) will turn off.
NOTE: The operator can adjust the timer setting and turn the
heating element(s) on or off at any time during operation
of the unit.
6. When cooking is complete, turn the heating mode selector
to the OFF (O) position. All indicator lights will turn off.
hOLD Function (TMS-1h models only)
When using the HOlD function, the overhead heating elements
operate at 25% of their maximum power/intensity to maintain
the cooking temperature reached during the cooking cycle.
1. Move the upper housing to the desired holding height.
2. Turn the heating mode selector to the HOlD l+R position.
• The lEFT and RIGHT indicator lights will illuminate to
indicate they are selected and heating.
• The ON indicator light will illuminate.
3. When holding is complete, turn the heating mode selector to
the OFF (O) position. The heating elements will turn off and
all indicator lights will turn off.
9
OPERATION