Definitions: Safety Guidelines; English (Original Instructions) - DeWalt D25951 Traduction De La Notice D'instructions Originale

DEMOLITION HAMMER
D25951
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Frequency
Power output
Impact rate
Single impact energy (EPTA 05/2009)
Tool holder
Chisel positions
Weight
Noise values and vibration values (triax vector sum) according to EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a =
h,Cheq
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Demolition Hammer
D25951
D25951
V 230
D WALT declares that these products described under
AC
e
V 230/115
Technical Data are in compliance with:
AC
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
1
2000/14/EC, Electrical concrete breaker (hand-held), m ≤ 15 kg,
Hz 50
Annex VIII, TÜV Rheinland LGA Products GmbH (0197), D-90431
W 1600
Nürnberg, Germany, Notified Body ID No.: 0197
min -1 1620
Level of sound power according to 2000/14/EC (Article 12,
J 24
Annex III, No. 10; m ≤ 15 kg):
SDS MAX
L (measured sound power level)
WA
12
L (guaranteed sound power level)
WA
kg 13.3
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
dB(A) 90
The undersigned is responsible for compilation of the technical
dB(A) 101
file and makes this declaration on behalf of D
dB(A) 2
m/s 2 8.8
m/s 2 1.5 Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
03.01.2018

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.



WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
EngLIsh
dB(A) 101
dB(A) 103
WALT at
e
WALT.
e
17