CASATELLI FILIPPO 12 E1C Généralités - Avertissements - Installation - Entretien page 42

REAR SMOKE OUTLET PRODUCT INSTALLATION
12.5.1
in compliance with the UNI 10683 - EN 1856-1-2 -
EN 1857 - EN 1443 - EN 13384-1-3 - EN 12391-1
standards both regarding the dimensions and the
materials used in its construction.
porous inner surfaces) are illegal and prevent the
stove from working correctly.
The discharge of fumes through a traditional
chimney is maintained;
If the chimney has a bigger section, it must be
"intubated" with a suitably insulated steel pipe (with
diameter in line with the route) (Fig. 5.9a).
Make sure that the connection to the brickwork
chimney is properly sealed.
If the pipes pass through roofs or wooden walls,
commercially available.
42
A) Windproof cowl
B) Seal
C) Inspect
Product images are purely indicative
004778350 - 16/07/2020
1) Vermiculite and/or mineral wool.
2) Steel pipes.
3) Closing panel.
Fig. 5.8a
Fig. 5.9a