Hortensus RG800 Mode D'emploi page 82

If you confirm with OK, all settings configured previously in the "Schedule" work mode are
reset. The screen shows you "Saved" and returns to selection in Schedule mode. Press
to return to the functional settings. The Start screen displays "SCHEDULE" and the symbol
for "Full area" or
AREA (work together with SCHEDULE – WORK MODE – AREA 1,2,3)
The sub-area setting is used to enhance the efficiency of the mower in large areas. More-
over, it helps the mower to move from one area to another in narrow passages. In case of
narrow passages, it may happen that without this function, the mower mows the area in
which the charging station is located, but ignores the area behind the passage. Due to a
problem with the boundary wire in case of narrow passages, the mower may possibly not
pass through. It is recommended that you maintain the minimum distance of 50 cm. For
narrow passages, divide the mowing area in up to three sub-areas and adjust the mower
in such a way that each area is processed independently.
1. Defining starting points
Put mower on fence wire with a maximum distance of 0.5 meter from charging station and
make the backside of the mower towards to charging station. Enter the password and press
"MENU".
2. Select , in order to define the starting points for up to three different areas in your
garden. Press "OK".
for "Area 1, 2, 3".
" "