Hortensus RG800 Mode D'emploi page 78

You can choose from Manual, Auto or Schedule work mode.
Mode 1: Manual
Choose the Manual mode if your lawnmower needs to continue run the mowing cycle before
you turn it off. The mower will work and charge and work ... until you stop it.
How:
1. Put the mower 0.5 meter in front of the charging station, facing the charging station.
2. Select "Manual" and press "OK". The screen displays "SAVED" and the tick mark is located
before "Manual". The screen returns automatically to the functional settings, press to
" "
return to the main menu, and "MANUAL" displayed on the starting screen.
3. Press the "Start" button on the keypad and the mower moves into the charging station.
When the contacts of the mower make contact with the charging pins on the charging station,
it leaves the charging station, then start working. It will mow along the fence line for 2 times,
then mow inside.
Mode 2: Auto
Choose the Auto work mode if your mower needs to mow every day during the same time
interval. Let the mower stand in front of the charging station after input the password and do
not turn it off. It will wait there until the Start time point is reached and then begins mowing.
How:
1. Put the mower 0.5 meter in front of the charging station, facing the charging station.
2. Select "Auto" and press OK. The screen shows the following:
3. Set the desired work time with the help of the digits on the keypad. The work time can be
set from 00:00 to 24:00. Press OK. Press " " , to return to the functional settings. "AUTO"
gets displayed on the Start screen.