Hortensus RG800 Mode D'emploi page 79

4. Don't turn off the mower, leave it there.
Mode 3: Schedule
Choose the Schedule work mode if you would like the mower to mow only on select days or
if you would like to use the Area function. Let the mower stand in front of the charging station
after the input the password and do not turn it off. It will wait there until the Start time point is
reached and then begins mowing.
How:
1. Put the mower 0.5 meter in front of the charging station, facing the charging station.
2. Select "Schedule" and press "OK". The screen will display the following message:
3. Confirm with OK, and then the following gets displayed:
You can now choose from the following options: "Work Mode", "Work Hours", "Work days" or
"Reset timer".
4. First choose the work mode and press "OK". You can now choose from "Full area" or
"Area 1, 2, 3".
4.1 Choose "Full area" if you would not like to define different areas.
4.2 Select "Area 1, 2, 3" if you would like to specify up to three different starting points to
the mower within your lawn area. This selection defines the next operation of programming.
(Select the appropriate work mode and confirm with "OK". The screen shows you "Saved"
and returns to selection in Schedule mode.)