Error Codes - Uline H-1679 Mode D'emploi

ERROR CODES

-----
Err 1
Err 2
Err 4
Err 6
PAGE 20 OF 62
ERROR CODES
DESCRIPTION RESOLUTION
Overload Remove weight from the scale.
If the problem persists contact Uline Customer
Service.
Date Setting Error Enter date using correct format.
Format: yy:mm:dd
Time Setting Error Enter time using correct format.
Format: hh:mm:ss
Zero Setting Error The scale was outside the normal zero setting
range either when it was turned on or when
the ZERO key was pressed.
Remove weight from the scale and try again.
Use the TARE key to set the display to zero value.
If the problem persists contact Uline Customer
Service.
A/D out of range The values from the A/D converter are outside
the normal range. Remove weight from the
scale if overloaded, make sure fork cover
plate is attached.
Indicates the load cell or the electronics may
be faulty.
If the problem persists contact Uline Customer
Service.
1-800-295-5510
uline.com
0522 IH-1679