Troubleshooting; Table: Malfunctions And Possible Causes - domoova DRV80 Mode D'emploi

EN

Troubleshooting

Please contact DOMOOVA technical department in the following
cases:
• If the appliance has been dropped, damaged or come into
contact with water.
• If the power cable is damaged.
• If the battery is defective.

Table: Malfunctions and possible causes

To avoid breakdowns/malfunctioning, regularly check and clean the
appliance accessories.
No. Malfunction
The appliance
01 does not
switch on.
The robot
does not
02
move
correctly
Cause
1. The appliance is not
switched on.
2. The appliance has
run out of battery.
1. The floor is wet.
2. The dust bin is not
attached correctly.
3. The central Animal
brush is not inserted
correctly.
24
Solution
1. Switch the power button
to ON.
2. Charge the robot using its
home base or plug it in to
the power cable.
1. Clean the floor.
2. Remove and reinsert the
dust bin.
3. Remove and reinsert the
brush in its cavity.