domoova DRV80 Mode D'emploi page 15

Operating the robot
CLOCK
Figure 3
Setting a schedule
Figure 1
Figure 3
Press the PLAN button on the remote control (Figure 1). The schedule
time flashes; use the arrows to adjust the hour and minutes (Figure
2). Press PLAN to validate the scheduled clean time (Figure 3).
To cancel a schedule, reset the scheduled PLAN time to 0 (Figure 4).
To do so, follow the same steps as above.
NOTE: Scheduled cleaning and the remote control times are cancelled when the
batteries are changed. Reset the time and scheduled cleaning time as above.
Press the CLOCK button on the remote
control (Figure 1). The time flashes;
use the arrows to adjust the hour and
minutes (Figure 2). Press CLOCK again to
validate the time (Figure 3). A quick beep
indicates that the time is set.
PLAN
PLAN
Figure 2
Figure 4
13
EN