Operating the robot
Preparing the water compartment
Note:
•
The water compartment has a maximum capacity of 300ml. For optimum per-
formance, it must have at least 50ml of liquid.
•
For optimum cleaning, check the dilution ratio indicated on the detergent bottle.
•
Only use floor cleaner.
•
Prolonged use of any other product, such as white vinegar or bleach, could
damage the water compartment.
Inserting the water compartment
The vacuum mode stops when the cleaning mode is selected; the
vacuum stops when the robot detects the water compartment.
Clip it to the back of the robot. The robot automatically detects the
water tank thanks to its tank sensor. The robot is ready to start its
cleaning cycle.
NOTE:
•
Do not use the water compartment to clean rugs or carpets.
•
The water tank must be removed from the robot before it is charged.
•
The dust remaining on the floor is picked up in the part of the tank intended for
the purpose as the central brush rotates.
•
To allow vacuum mode to work, please refer to Vacuum Mode (page 10).
Open the water compartment's refill
nozzle and carefully pour in clean water
with some floor cleaner.
11
EN