IMPORTANT INFORMATION ABOUT INSTALLING
This appliance is NOT intended for use in a commercial environment.
•
Please observe the installation instructions provided and note that this appliance should only be
•
installed by a quali fied technician.
The appliance is fitted with a plug and must only be connected to a properly installed earthed
•
socket.
•
In case a new socket is needed, installation and cable connection must only be done by a quali
fied electrician. If the plug is no longer accessible following installation, a pole disconnecting
device must be present on the installation site with a contact gap of at least 3 mm.
•
Adapters, multiway strips and extension cords must not be used. Overloading can result in fire.
•
If the appliance is not fitted with a supply cord and a plug, the connection equipment must have
a contact separation in all poles that provide full disconnection, and the appliance must be
incorporated in the fixed wiring in accordance with the wiring rules.
The accessible surface
may be hot during
operation.
40