Connection Test; Displays; Status Indications - Alpha IP RTA 61001 Serie Mode D'emploi

Displays

6.2.1 Connection test

During this verification the room control unit Analog sends a switching command
to the base station. Depending on the switching status the assigned heating zone
has, it will be switched on or off after receiving the command.
1. Remove setting wheel (E).
2. Press the Set button in order to perform a radio test.
7 Displays

7.1 Status indications

Display
1 x long illumination in
green
Short flashing in orange
1 illumination in orange
and 1 in green (after in-
serting batteries)
38
Meaning
Process confirmed
Radio transmis-
sion/transmission
attempt/data trans-
mission
Test indication
Solution
Process with the set-up/op-
eration.
Wait until the transmission
has finished.
After the test indication has
gone out, proceed with the
set-up/operation.