Device overview
Communication with other components will be performed over the Homematic
(HmIP) radio protocol. The radio transmission is done on a non-exclusive transmis-
sion path; thus, disturbance cannot be completely excluded. Disturbance impacts
can be caused by switching processes, electric motors or electric appliances.
The range within buildings can differ strongly from the range outside (in
open air).
4 Device overview
(see fig. 3 page 4)
(A)
Installation bottom
(B)
Room control unit Analog
(C)
System button (teach-in button and LED)
(D)
SET button
(E)
Setting wheel
(F)
Setpoint correction limiter
(G)
Temperature limiters
4.1 Technical data
Short designation of device RTA 61001-xx
Supply voltage
Power consumption
30
2x 1.5 V LR03/micro/AAA
max. 50 mA