840117900 ENv00 8/27/03 11:28 AM Page 5
Using the Allergen Reducer
Before First Use: Be sure to remove all packing materials. The filter is packed in a
plastic bag inside the Allergen Reducer for shipping.
1. For model 04381: To remove the
For model 04371: To remove the
Replacing the Filter
1. Turn off and unplug Allergen
Reducer. Remove the front grille
then remove the used filter by grip-
ping the sides and pulling outward.
Discard the used filter. It cannot be
cleaned.
To Order Replacement Filters
The Allergen Reducer is designed to
filter the room three times per hour at
high speed. Factors such as room
shape and ceiling height can affect
this rate. It is normal that the air flow
will be reduced as the filter becomes
clogged. Replace the filter as needed.
To order replacement filters, call
Customer Service:
U.S. at 1-800-851-8900
Canada at 1-800-267-2826
2. Remove the plastic bag from the
front grille,
filter then replace the filter in the unit.
press on the
3. To close the front grille of the Allergen
grille release
Reducer, position the grille on the
buttons on
front of the unit and push until it
each side of
snaps into place.
the grille and
4. Ensure the Allergen Reducer is in the
pull towards
OFF position.
you.
5. Plug in the Allergen Reducer.
6. Select desired fan speed.
NOTES:
front grille,
• The life of the filter is determined by
grasp each
use. If the Allergen Reducer is used
side of the
continuously, it may need to be
grille and pull
replaced after 1 month. If only used
towards you.
occasionally, it may last up to 4 months.
• Filter life will depend on use and
allergy season.
2. Obtain a replacement filter. Insert the
unwrapped filter.
NOTE: Improper filter installation will
result in poor air filtration.
Purifier
Model
04371
04381
Room Size
(sq. ft.)
Filter
110 ft
2
04711
210 ft
2
04712
5