How To Assemble And Use - Hamilton Beach TrueAir 04371 Mode D'emploi

840117900 ENv00 8/27/03 11:28 AM Page 4

How to Assemble and Use

IMPORTANT: Your TrueAir
maintenance. Make sure that the filter is properly installed before use.
WARNING: To reduce the risk of electrical shock, never plug in the Allergen
Reducer while your hands are wet. Always unplug the Allergen Reducer before
moving or servicing the unit.
About Your Allergen Reducer
How the Allergen Reducer filters air:
1. A fan draws air through the intake
grille on the front of the Allergen
Reducer. Then it passes through the
filter which traps large allergen
particulates.
Selecting the Proper Location
To prevent the risk of personal injury or damage to the Allergen Reducer and
provide the best possible performance of your Allergen Reducer, follow the
placement guidelines below:
DO:
• Place the Allergen Reducer on a
• Place Allergen Reducer near an
electrical outlet where it is out of
the way. Make sure that the Allergen
Reducer and the cord do not
present tripping hazards.
• Select a central location with
adequate air circulation.
• Turn off and unplug the Allergen
Reducer before moving or servicing
it, or if it will not be used for several
days.
• Route the electrical cord clear of
furniture to prevent damage from
pinching the cord.
4
™ Allergen Reducer is designed for easy use and
2. The filtered air is then released
through the outlet grille on the top
of the unit.
NOTE: The filter is designed to filter
allergens.
DO NOT:
• Do not stand, sit, or place any
flat, stable
surface.
• Do not block the air intake and
outlet grilles with drapes, curtains,
or blinds. This may cause reduced
performance.
• Do not use in cooking areas, garage,
or areas with grease, oil or chemicals
such as solvents or insecticides.
• Do not place on or near heat sources
such as stoves, radiators, or heaters.
• To reduce electrical noise and
interference, do not place on or near,
or plug into the same outlet as TVs,
baby monitors, or cordless phones.
• Do not place in direct sunlight as the
plastic may discolor after prolonged
exposure.
objects
on the
Allergen
Reducer. It is
not designed
to support
additional
weight.