General Safety Instructions; Purpose - Calira LG 416-DS/IU Instructions De Montage

General safety instructions

The following important safety instructions must be
observed when using electric devices, as protection
against electric shock, injury and fire hazard. Please read and
follow these instructions before using the device.
Setting up
Please ensure that the device is placed securely and cannot
fall down or tip over. Always position cables so that nobody
can trip over them. Do not expose electric devices to rain. Do
not operate electric devices in a damp or humid environment.
Do not operate electric devices in the vicinity of flammable
liquids or gases. Place electric devices so that children do not
have access to them.
Protection against electric shock
Only operate devices whose housing and cables are undam-
aged. Ensure safe cable positioning. Do not pull cables.
Safeguard the electric connection of the devices with a
30 mA-rated leakage current circuit breaker, and only
operate it with this protection. Observe the power supply
companies regulations.
Use
Do not use electric devices other than for the purpose speci-
fied by the manufacturer.
Accessories
Only use accessories and supplementary devices supplied or
recommended by the manufacturer.
16

Purpose

The purpose of the charger is exclusively to charge 12 Volt
lead accumulator batteries consisting of 6 separate cells
(e.g. car batteries) having a capacity of 50 – 160 Ah. It is
universally usable and is designed for permanent operation,
parallel operation and buffer operation. This automatic charger
has been designed to work best with gel, AGM or liquid elec-
trolyte batteries. The charger is particularly suitable for the use
in boats, caravans and mobile homes. The charger must only
be operated in dry spaces.