Table des Matières
Publicité
Product description
Description of parts (Fig. 1)
A Front grill
B Removable filter for the air inlet aperture
C Cold shot button
D Switch for temperature settings
E On/off switch, fan settings
F Hanging loop
G Mains cable
H Narrow attachment nozzle
I
Wide attachment nozzle
J Styling diffuser (optional accessory 4360-7000)
K Comb nozzle (optional accessory 4340-7000)
Technical data
Drive:
AC motor
Operating voltage:
220 – 240 V / 50/60 Hz
Power consumption:
1300 – 1500 W
Dimensions (LxWxH):
24 x 90 x 220 mm
Weight:
570 g without mains cable
Emission sound
pressure level:
Fan setting 1
Max. 67 dB(A) @ 100 cm
Fan setting 2
Max. 72 dB(A) @ 100 cm
Vibration:
< 2.5 m/s
Operating conditions:
Ambient temperature:
0°C – +40°C
The appliance is safety insulated and radio screened. It
meets the requirements of EU Electromagnetic Compatibil-
ity Directive 2014/30/EC and Machinery Directive 2006/42/
EC.
Operation
Preparation
f Check that the contents are complete.
f Check all the parts for possible transport damage.
Safety
Caution! Damage due to incorrect power
supply.
f Only operate the appliance with the voltage
stated on the nameplate.
Operation
1. Insert the mains plug into the socket.
The hairdryers have 3 temperature settings and
2 fan settings that, thanks to separate switches,
enable a total of 6 temperature/fan settings. Occa-
sionally, the cold shot button (C) can be used to
fix the hairstyle.
2
2. Switch on the appliance at the on/off switch (E).
3. Select the desired fan setting.
Fan-setting switch (E):
I
Fan setting 1, for a gentle airflow
II
Fan setting 2, for a strong airflow
4. Select the required temperature setting.
Switch for temperature settings (D):
0
Temperature setting 1, for cold air
I
Temperature setting 2, for hot air
II
Temperature setting 3, for hotter air
Cold shot button(C):
By pressing the cold shot button and keeping it
depressed, the hairdryer can be switched to cold
air for short periods. To return to the set tempera-
ture, simply release the cold-shot button.
5. Using the on/off switch (E), switch off the appliance
after use.
Operation
Styling with the nozzle
The nozzle can be used to direct the airflow onto the styl-
ing brush.
1. Position the nozzle and press it towards the housing
(Fig.2ⓐ).
2. You can remove the nozzle simply by pulling it off in the
direction of the arrow (Fig. 2ⓑ).
Overheat protection
The hairdryer is fitted with an overheat protection facility.
Should the appliance overheat, the heating process is
interrupted and only cold air flows out. After the appliance
has cooled down, the heating element will switch on again
automatically.
ENGLISH
de
en
fr
it
es
pt
nl
da
sv
no
fi
tr
pl
cs
sk
hr
hu
sl
ro
bg
ru
uk
et
lv
lt
el
ar
13
Publicité
Table des Matières
